Classy Caps 6X6 Black Aluminum Oxford Solar Post Cap SLX772B

Introduction

The Black Diamond PAR36 Well Light comes in three glass top variations: flat, flat grate, or angled. All glass tops are available in Black Brass or Bronze finishes. It is available without a lamp or with a PAR36 (7W 2700K 30 675 Lumens). This well light is fitted for any of ourPAR36 lampsand really comes to life with theChameleon PAR36for RGBW applications.

INSTALLING THE LAMP

1. Loosen the thumbscrew on the lens cap and remove the lens cap and the stainless steel gimbal from inside the Black Diamond PAR36 Well Light.

2. Install the lamp and snap it into the gimbal.

3. Return the gimbal to the well light.

4. Place the lens cap and tighten the thumbscrew to protect from debris.

INSTALLING THE FIXTURE

1. Dig a hole in the ground approximately 12 wide by 14 deep.

2. Connect the power cable to the fixture, leaving 2 feet of wire coiled in the bottom of the fixture for future service.

3. Pour 8 of pea gravel in the hole.

4. Place the fixture in the center of the hole.

5. Add more pea gravel to fill the hole 1 before the fixture lip. This allows for proper drainage around the fixture.

6. Place the specified lens assembly on the top of the fixture and tighten the set screw. Use the specified lens in all applications to protect from debris.

7. Apply glass wax on top of the lens to protect against standing water.